鏈條式升降平臺升降過程中軌道有異響怎么辦
？

來源：濟南眾泰升降機械有限公司發布日期：2022-05-16 08:49:54

鏈條式升降平臺http://www.shengjiangji168.com/臺面在升到二樓過程中會出現異響

，針對這個問題

，我們派出了最專業的安裝人員到達客戶的使用現場，通過勘察發現

，主要是因?yàn)閷?dǎo)軌進行了拼接

，而且安裝的過程中拼接的接頭沒有接好，導致了鏈條式升降平臺在升降到二樓會由于導軌輪走到拼接的地方

，會出現這種情況。
Chain type lifting platform in the ascending to the second floor in the process will appear abnormal sound, in order to solve this problem, we sent a most professional installation personnel arrived at the scene, through the survey found, mainly because of the guide of splicing, and installed in the process of stitching joint is not connected, lead to the chain type lifting platform on the lifting to second floor due to the guide rail wheel went to the splicing place, will appear this kind of circumstance.

濟南航天升降機械的專家提醒大家鏈條式升降平臺http://www.shengjiangji168.com/安裝的過程中盡可能保證導軌的垂直度

，在導軌拼接的時候心要以不要焊接導軌輪的一側

，要焊接其他三個面。如果客戶要求把三個面全部焊接的話

，焊接完成后用打磨機進行平整面的打磨

，保證在導軌輪升降的過程中不出現類似的異響。
Jinan Aerospace lifting machinery experts remind everyone chain type lifting platform installation process as far as possible to ensure that the guideways perpendicularity, in guide mosaic heart to stop welding wheel guide rail on the side of the, to be welded to the other three. If the customer requires all three surface welding, welding is completed with the polishing machine for the smooth surface of the grinding, to ensure that in the course of the lifting of the track wheel does not appear similar abnormal sound.